Generac Generator 6500 Manual
Generac Generator 6500 is a reliable and powerful generator that can provide up to 6,500 watts of power. This manual will help you understand the features and operation of this generator so you can use it safely and effectively.
The Generac Generator 6500 has a recoil start system that is easy to use and allows you to start the generator quickly and with minimal effort. It also has a manual choke lever and a fuel shutoff switch that makes it easy to stop and start the engine.
The Generac Generator 6500 also has a range of safety features. It has a low oil shutoff system that will automatically stop the engine if the oil level gets too low. It also has a circuit breaker that will protect the generator from overloads and short circuits.
The Generac Generator 6500 also has a variety of outlets to provide power to a variety of tools and appliances. It has two 120V AC outlets, one 240V AC outlet, one 120/240V AC outlet, and one 12V DC outlet. It also has a 30-amp RV outlet for RV use.
The Generac Generator 6500 also has an easy to read digital display that will show you the current power output. It also has an hour meter that will tell you how many hours the generator has been running. This will help you keep track of the maintenance schedule for the generator.
It is important that you read the Generac Generator 6500 Manual before using the generator. This will help you understand how the generator works and make sure that you operate it safely. The manual also has information about maintenance and troubleshooting tips if something goes wrong.
By reading the Generac Generator 6500 Manual, you will be able to get the most out of your generator. This will make it easier to use and ensure that it lasts for years to come.
Frequently Asked Questions
FAQ 1: What is the fuel type for a Generac 6500 Generator?
Answer: The Generac 6500 Generator runs on unleaded gasoline.
FAQ 2: How much oil does a Generac 6500 Generator require?
Answer: The Generac 6500 Generator requires 2.6 quarts (2.45 liters) of SAE 10W-30 engine oil.
FAQ 3: What is the recommended oil pressure for a Generac 6500 Generator?
Answer: The recommended oil pressure for a Generac 6500 Generator is between 20 and 50 psi (138.9 and 345.7 kPa).
FAQ 4: What is the recommended voltage for a Generac 6500 Generator?
Answer: The recommended voltage for a Generac 6500 Generator is 120/240 volts.
FAQ 5: How often should I change the oil in my Generac 6500 Generator?
Answer: It is recommended to change the oil in your Generac 6500 Generator every 50 hours of use or at least once a year.